•
Ultra bright 420 & 300 lumen outputs
•
Precision optics
•
5 Lighting modes
(Med > Hi > Low > 2-in-1 Steadypulse
TM
> Day Flash)
•
Internal USB rechargeable Li-Ion battery
•
Side illumination ports for added visibility
•
Water resistant design
•
Feather-light 110 grams
•
Locktite
TM
tool-free handlebar mount
OPERATION MANUAL
OPERATION MANUAL
OPERATION MANUAL
OPERATION MANUAL
OPERATION MANUAL
CONTENTS
• Super bright LED Headlight
• USB cable
• Handlebar bracket
Congratulations on your purchase of the Metro high-brightness LED
headlight system. Please refer to this guide to operate your Metro
safely and properly.
Super Bright LED Bicycle Lighting System
with USB rechargeable Li-Ion battery
CAUTION:
· Headlight may get hot during use. Use caution when handling.
· Unplug the headlight from charger when not in use.
· Unplug connectors by the plug, never by the cable.
· Do not modify or substitute any parts with non-Cygolite parts.
· Do not open headlight case.
· Provide adequate airflow to the headlight to cool during use.
· If the light is on & stationary longer than 10 minutes, turn it off.
· Do not look directly at light.
· Do not operate or submerge under water.
· Do not operate the light unattended.
· Keep headlight away from combustible materials.
· Do not package headunit when hot or immediately after use.
· Carrying a flash light is recommended.
· This light is for bicycle use only.
· State laws regarding flashing bicycle lights may vary among states. Use the flashing
modes in accordance to your local state laws as well as federal law.
Metro
420 / 300
TM
FEATURES
FEATURES
FEATURES
FEATURES
FEATURES
CONTENTS
CONTENTS
CONTENTS
CONTENTS
CONTENTS
The Metro features 5 light settings controlled by the power button. During
use, the power button will illuminate to show the power is on. The diagram
and instructions below indicate where the light features are located on the
headlight.
CAUTION:
The light may get hot during use. Handle with care and turn
light off if stationary for more than 10 minutes.
OPERATION
1. Press power button to operate the light. The light will turn on and the
power button will illuminate.
2. Press power button to scroll through the different settings.
3. Hold the power button for 2 second to turn the light off.
LIGHT MODE MEMORY
For convenience, the Metro memorizes the last mode used before it is
turned off. When it is turned back on, it will turn on in that mode.
LIGHT SETTINGS
Med > High > Low > 2-in-1 Steadypulse > Day Flash
2-in-1 Steadypulse setting
combines steady brightness to see and
alerting flash to be seen into one setting. It is made especially for riding
at night in high traffic areas.
SIDE ILLUMINATION PORTS
During use, the side ports will illuminate to provide added side visibility to
adjacent motorists and traffic.
LOW BATTERY
If the light dims dramatically during use, the battery is near empty. At this time
we recommend stop using the light and recharge it immediately.
HEADLIGHT OPERATION
HEADLIGHT OPERATION
HEADLIGHT OPERATION
HEADLIGHT OPERATION
HEADLIGHT OPERATION
Power Button
(During use)
Solid = Light On
USB port
Side Illumination ports
3. Wrap bracket around handlebar, return thumbnut in slotted space, twist
thumbnut clockwise to tighten.
4. Slide headlight back into the bracket until headlight clicks into place.
5. To remove headlight, press the release tab on the bracket and slide the
headunit forward.
3
4
Thumbnut
Release Tab
The Locktite
TM
handlebar bracket has a tool-free design to let you mount
the bracket on the handlebar with ease while firmly staying in place
through all riding conditions.
1. Attach handlebar spacers to inside of handlebar bracket for standard
sized handlebars. Remove spacers for oversized handlebars.
2. Attach rubber pad to handlebar spacer (or handlebar bracket) for grip.
MOUNTING ON HANDLEBARS
MOUNTING ON HANDLEBARS
MOUNTING ON HANDLEBARS
MOUNTING ON HANDLEBARS
MOUNTING ON HANDLEBARS
Rubber pad
Attach Handlebar spacers
(for standard sized bars)
ADJUST THE SIDE-TO-SIDE BEAM DIRECTION
Swivel the headlight left to right to adjust the side-
to-side direction. If side swivel becomes loose,
tighten the swivel screw on the top of the bracket
with a philips screwdriver.
ADJUSTING THE VERTICAL BEAM DIRECTION
Twist bracket thumbnut counterclockwise to loosen
bracket. Rotate bracket around handlbar for
preferred vertical beam angle then tighten
thumbnut.
1
2
OPTIONAL MOUNTING
An optional helmet mount kit (Part No. HLMT-DCV6) is available for this
light. To order, call Cygolite customer service or order online at:
shop.cygolite.com
Thumbnut
