1 |
P a g e
Explorer Helmet Light
Mounting Instructions
Use and Care:
•
Start by fully charging your new battery, do not remove until the charger light turns green.
•
During operation, If the battery runs low, do not continue to try to fire the light at the switch.
•
Battery life is increased with repetitive use.
•
Store battery with at least a 50% charge.
Turn On:
hold down the switch for ~3 seconds.
Switch between high and low:
One press of the button (once light is turned on)
Turn Off:
hold down button for ~3 seconds.
Low Power:
The glowing green ring will turn red if there is insufficient power.
Switch Memory:
When the bike is turned off the light will stay at whatever
setting you were previous at. ;i.e. if you were on high beam when the bike was
shut off, the high beam will come back on when the bike is started again.
The Lithium Battery case is
water-resistant
.
The Batter case
is NOT waterproof.
Do not submerge
batteries in water or any other liquid- EXPLOSION/FIRE DANGER
BATTERY SAFETY
Do Not Leave Battery Un-Attended While Charging
Never Charge the Battery in a Wet or Flammable Environment
Do Not charge or use a Swollen or Damaged Battery Pack
Fire Risk
Dispose of battery pack
