cycliq Fly12 CE122, Руководство пользователя

Страница: 18 / 31

18 of 31 Fly12 CE122 User Guide |
Capturing still images
The Fly12 can take a still image while recording video. You can do this by
holding the Q and Power button together, indicated by a ‘snapshot’ sound.
This image will be saved as a JPEG and can be accessed with the rest of
your footage.
Cycliq Home Safe Function
Your safety is our number one priority. When the battery is running low, the
Fly12 will manage the available battery capacity by automatically dimming
the strength of the bike light and turning off the camera.
The Fly12 will monitor battery level while you are recording and activate when
the battery level has depleted to between 6% and 12% (depending on the
Fly12 settings). When Home Safe Mode is activated, you will hear three long
beeps, the camera will switch off and the light will dim, the Fly12 will then
beep every 60 seconds. In this mode the light will continue to function for 30
to 45 minutes (depending on the light mode).
Bike Alarm
The Fly12 Bike Alarm can be armed via the CycliqPlus mobile app. If your
Fly12 is moved (including if your bike is moved while the Fly12 is attached),
it will sound an alarm and the lights will begin to flash and the camera
will start recording. You will receive a notification on your smartphone via
Bluetooth (if you are in Bluetooth range and connected to the Fly12).
The Bike Alarm can be armed or disarmed via the CycliqPlus mobile app.
Manual override of Bike Alarm
If the alarm is active but cannot be stopped, press both the Power
button and Q button until the alarm stops. This normally takes around
eight seconds.
Idle Mode
Idle Mode is intended to assist with battery management. If Idle Mode is
active, the Fly12 turns off automatically after sensing no movement for 15
minutes. You can turn the Fly12 back on as you normally would when you
return to using it.
Idle mode can be enabled and disabled via the CycliqPlus app.

Caution
Cycliq recommends carefully familiarising yourself with this function before
using it as this function can prevent your ride from being recorded. Idle
Mode should only be used with audible alerts on, so you are aware if the
Fly12 is turned on.
Cycliq Quick Release System
The Fly12 can be easily and quickly mounted and removed from the
handlebar mount using a 1/8th turn.
To find compatible Cycliq mounting systems, see
Cycliq Accessories
on cycliq.com.