Cyclades AlterPath OnBoard Скачать руководство пользователя страница 305

Страница: 305 / 460

Introduction

269

Options Under “Mgmt”

Configuration Backups Before Upgrading Firmware

Any configuration changes made after the last backup copy was made are lost
unless the configuration files were backed up before the upgrade and then
restored afterwards (see “Backing Up Configuration File Changes” on page
68 and “Restoring Backed Up Configuration Files” on page 69).

To Download OnBoard Firmware From Cyclades

An administrator can use this procedure to download OnBoard firmware from
the Cyclades ftp server onto a local ftp server.

After downloading the software onto the OnBoard by following this
procedure, the administrative user needs to perform the procedure under “To
Upgrade the OnBoard’s Operating System, Applications, and Configuration
Files” on page 272 to upgrade the firmware.

Log into a local ftp server as root.

Change to the directory into which the software needs to be downloaded.

Enter the

ftp

command to access

ftp.cyclades.com

Enter “anonymous” when prompted for the “Name” and press “Enter”
when prompted for the password.

cd /tmp

ftp ftp.cyclades.com

Connected to ftp.cyclades.com (64.186.161.16).

220 “Welcome to Cyclades FTP service.”

Name (ftp.cyclades.com:root):

Name (ftp.cyclades.com:admin):

anonymous

331 Please specify the password.

Password: <Enter>

ftp>

Содержание AlterPath OnBoard













































































































































































































































































































































































































































































Результаты поиска

Содержание AlterPath OnBoard

Отзывы:

Бренды по названию

Популярные бренды

Cyclades AlterPath OnBoard, Руководство администратора

Результаты поиска

Содержание AlterPath OnBoard

Отзывы:

Бренды по названию

Популярные бренды