manualshive.com logo in svg

Cyclades AlterPath OnBoard, Руководство администратора

Поделиться
Скачать
Cyclades AlterPath OnBoard Скачать руководство пользователя страница 139

Web Manager Wizard 

103

 

 

Configuring Private Subnets and Virtual Addresses—Wizard

The following table defines the information that must be supplied in the fields 
that define a virtual network: 

T

To Configure a Private Subnet and Optional 

Virtual Network—Wizard

1.

Log into the Web Manager as an administrative user.

See “To Log Into the Web Manager” on page 75, if needed.

2.

Click the “Wizard” button.

3.

Click the “Subnets” option in the left menu bar.

4.

Under “Virtual Network (DNAT) configuration,” enter the IP address 
within the virtual network’s network address range in the “Address” field.

5.

Enter a netmask in the “Netmask” field.

6.

Click “Save and apply changes.”

7.

Click the “Next” button, if desired, to go to the next Wizard step.

Table 3-5: 

Fields on the Private Subnet Virtual Network Configuration Dialog

Field

Description

Address

IP address to assign to the OnBoard from the virtual network. For example, if 
the virtual IP address of the network is 10.0.0.0, 10.0.0.254 would a valid IP 
address for the OnBoard that could be entered here. 

Netmask

Netmask (which is used in combination with the network address portion of the 
“Address” above to define the address range of the virtual network), in the form 

NNN

.

NNN

.

NNN

.

N

, as in: 255.255.255.0.

Содержание AlterPath OnBoard













































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды