CyberResearch MPE 06, Руководство пользователя

Страница: 57 / 98

CyberResearch
®
Displays MPE Series
CyberResearch, Inc . 57
25 Business Park Drive P: (203) 643-5000; F: (203) 643-5001
Branford, CT USA www.cyberresearch.com
5.5 Mounting the Monitor
The MPE series LCD monitor can be mounted in a panel, cabinet, rack, DIN rail or wall.
The monitor can also be mounted on a monitor arm or stand. The mounting methods are
described below.
CAUTION:
When mounting the monitor take care to tighten the retention screws or bolts
until fully secure, but do not over tighten. Over tightening the retention screws
or bolts may cause them to become stripped, rendering them useless.
5.5.1 Panel Mounting
Each model of the MPE series LCD monitor has a series of mounting slots located on the
top and bottom panel for mounting the monitor to a panel.
NOTE:
The MPE 06 monitor requires two special mounting brackets for installation into
a panel. Refer to Section
4
5.5.1.2 for details.
4
Table 5-5 lists the number of mounting clamps required to mount the monitor to a panel.
Model Mounting Clamps
MPE 12 10
MPE 10 10
MPE 08 8
Table 5-5: Panel Mounting Clamps
5.5.1.1 Standard Panel Mounting
The standard panel mounting procedure applies to the following MPE series LCD
monitors: