CyberPower Remote Management System
59
A
ppendix 5: RMCARD Adapter Guide
Remove the Adapter to convert an RMCARD305 to an RMCARD205
Step 1. Remove the
two screws from the
adapter holding the
card in place.
Step 2. Remove the
card from the adapter.
Step 3. Remove the
screw holding the
RMCARD305 front
panel to the card.
Step 4. Attach the
RMCARD205 front
panel to the card.
Add the adapter to convert an RMCARD205 to an RMCARD305
Step 1. Remove the
screw holding the front
panel to the card and
remove the RMCARD205
front panel.
Step 2. Screw on the
RMCARD305 front
panel to the card.
Step 3. Insert the card
into the adapter.
Ensure that the card is
securely seated in
place.
Step 4. Use the two
adapter screws to
secure the card in
place.
Note: The RMCARD Adapter Kit is not included with the RMCARD205. Please contact
CyberPower for ordering information or Technical Support.
Note: RMCARD205 is designed for the 43x18mm (1.69x0.71inch) SNMP card expansion port of
CyberPower PR, OR, and 1-3kVA OL series UPS, and ATS PDU.
RMCARD305 is designed for the 57x23mm (2.24x0.91inch) SNMP card expansion port of
CyberPower OL6-10kVA series UPS.
