CONGRATULATIONS ON YOUR PURCHASE
Thank you for selecting the CyberPower P403URC1 Surge
Protector. This manual explains the features and operation of the
P403URC1. Please take a few moments to read this manual.
FEATURES
1. ON/OFF Reset Control Switch and Circuit Breaker
Controls power to all outlets. The switch is also a 15 A breaker.
When an overload occurs, it will automatically switch off. To
resume operation, ensure the overload condition is removed
and reset the surge protector by switching the unit ON.
2. Standard Grounded Outlets (4)
3. USB Charging Ports* (2)
Connect and charge up to two (2) USB devices using the surge
protected USB charging ports.
*USB outlets cannot be used as a USB hub. This device does
not transfer data.
SPECIFICATIONS
• Model Number: P403URC1
• Outlets: Standard Grounded Outlets (4), USB Charging Ports (2)
• Power Cord Length: 3 ft
• Plug Type: Low Profile
• Surge Protection: 500 Joules
• Electrical Rating: 125 V/15 A/1875 W
• USB Charging Rating: 5 V/2.4A total
• UL Clamping Voltage: UL 1449 4th/800 V (L-N)
• Maximum Peak Current: 15,000 A
• 1 AC Line Protected: L-N: 15,000 A (The maximum surge possible
on household wiring is 6,000 volts)
• Response Time: Less than 1 nanosecond
• Circuit Breaker: Resettable 15 Amp
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK
- Use only in dry
locations and only indoors.
DO NOT
plug into another relocatable
power tap.
DO NOT
“daisy chain” surge protectors.
DO NOT
use
with any aquarium equipment.
DO NOT
use if properly grounded
outlets are not available.
DO NOT
install this device if there is less
than 10 meters (30 feet) or more of wire between the electrical
outlet and electrical service panel.
DO NOT
use for medical or life
support equipment. This device features an internal protection that
will disconnect the surge protective component at the end of its
useful life, but it will maintain unprotected power to the load.
TROUBLESHOOTING
▪
If the ON/OFF is switched OFF, the 15 Amp circuit breaker may
have tripped. Examine your connected equipment and remove
the device that is overloading the circuit. Then, turn the
ON/OFF switch back to RESET.
TECHNICAL SUPPORT
Please contact our Tech Support Department
with installation, troubleshooting, or general
product questions.
• Phone: 1-877-297-6937
• Email: [email protected]
• Hours of Operation:
Monday – Friday 7:00am – 6:00pm CST
USER MANUAL
4-Outlet Surge Protector
with 2 USB Ports
P403URC1
4-Outlet Surge Protector
with 2 USB Ports
P403URC1
1
2
Copyright © 2019 Cyber Power Systems (USA), Inc. All rights reserved.
USB
2.4A