Copyright © 2021 Cyber Power Systems, Inc. All rights reserved.
K01-C000652-02
Voltage Regulator
CL1000VR / CL1500VR / CL2000VR
User’s Manual
IMPORTANT SAFETY INSTRUCTIONS
This manual contains important safety instructions. Please read and follow all instructions carefully during installation and operation of the
unit. Read this manual thoroughly before attempting to unpack, install, or operate the Voltage Regulator.
CAUTION!
To prevent the risk of fire or electric shock, install in a temperature and humidity controlled indoor area free of conductive
contaminants. (See the specifications for the acceptable temperature and humidity range.)
CAUTION!
To reduce the risk of overheating the Voltage Regulator, do not cover the unit’s cooling vents and avoid exposing the unit to
direct sunlight or installing the unit near heat emitting appliances such as space heaters or furnaces.
CAUTION!
Do not plug the unit input into its own output.
CAUTION!
Do not allow liquids or any foreign object to enter the unit. Do not place beverages or any other liquid-containing vessels on or
near the unit.
CAUTION!
In the event of an emergency, press the
RESET/OFF
switch to OFF position and disconnect the power cord from the AC
power supply to properly disable the unit.
CAUTION!
Unplug the unit prior to cleaning and do not use liquid or spray detergent.
INSTALLING YOUR AVR SYSTEM
UNPACKING
The box should contain the following:
(1) Unit x 1; (2) User Manual x 1;
OVERVIEW
The CL series guarantees reliable and stable power output for POS systems, home theater systems, home appliances, computers and
laptops. The power conditioner has built-in Automatic Voltage Regulation (AVR) function to offer stabilized AC power output, especially
suitable for areas with unstable utility or for use with generators. The product has built-in surge and spike protected outlets, EMI filter and
overload protection to safeguard connected equipment.
The total power consumption of all equipment plugged into the CL series must not exceed the “Output Power Capacity” rating listed in the
Specifications table.
BASIC OPERATION
1. Normal Mode LED
The green LED will light when utility power is normal.
2. AVR Mode LED
The yellow LED will light when utility power is abnormal and the unit will work in AVR mode.
3. Input abnormal voltage LED
The red LED will light when utility power is not in input voltage range as defined in “TECHNICAL SPECIFICATION”.
4. RESET/OFF Switch
Press the switch to RESET position to turn ON the unit. Press the switch to OFF position to turn OFF the unit. The circuit breaker is in
the OFF position. When overload condition is detected, the switch will be tripped to OFF position for protection.
5. Surge Outlet
Provides surge protection for devices that don’t require AVR function.
6. AVR Outlet
Provides AVR and surge protection.
The unit has several AVR and surge suppression outlets to offer stabilized AC output for connected equipment.
7. Input power cord
Connect to utility power.
TECHNICAL SPECIFICATIONS
Model
CL1000VR
CL1500VR
CL2000VR
Output Power Capacity (VA)
1000
1500
2000
Output Power Capacity (Watts)
500
750
1000
Nominal Voltage
120Vac
Input
Acceptable Voltage Range Tolerance
82-148Vac
Frequency
50/60Hz
Output
Output Regulation
12%
Overload Protection
Circuit Breaker
Surge Protection
245 Joules (L-N)
Total Outlets
NEMA x 8 (4 SURGE + 4 AVR)
Environmental
Operating Temperature
0° C to 40° C
Operating Relative Humidity
0 to 90%
Physical
Maximum Dimensions
(W x H x D) (mm)
205 x 115 x 146
Weight (kg)
1.62
2.28
3.28
TROUBLESHOOTING
Problem
Possible Cause
Solution
The unit will not turn
on.
The unit is not connected to an AC outlet.
The unit must be connected to a 120 50/60Hz outlet.
Mechanical problem.
Contact CyberPower Systems Technical Support.
Outlets do not
provide power to
equipment
RESET/OFF switch is tripped due to overload
protection.
Unplug all connected equipments and reset the switch.
Unit is automatically turned off due to over
temperature protection.
Reduce the amount of equipment which is connected
to AVR outlets and wait for 30 minutes. The output
power will recover automatically.
Unit has been damaged by a surge or spike.
Contact CyberPower Systems Technical Support.
CyberPower Systems (USA), Inc.
5555 12th Avenue East, Suite 110, Shakopee,MN55379
Phone: (952)403-9500
Fax: (952)403-0009
www.cyberpower.com
Cyber Power Systems S.A. de C.V.
ANICETO ORTEGA NO. 634, COL. DEL VALLE CENTRO,
ALCALDÍA BENITO JUÁREZ, C.P. 03100, CIUDAD DE
MÉXICO, MÉXICO.
Tels: (0155)4622-8654
www.cyberpower.com.mx
All rights reserved. Reproduction without permission is prohibited.
