Installing the Singlewire InformaCast® RGB (Multi-Color) Strobe
Singlewire InformaCast® RGB (Multi-Color) Strobe Setup
Operations Guide
931633A
CyberData Corporation
21
2.3.4 Log in to the Configuration Home Page
1. Open your browser to the Singlewire InformaCast® RGB (Multi-Color) Strobe IP address.
Note
If the network does not have access to a DHCP server, the device will default to an IP
address of 10.10.10.10.
Note
Make sure that the PC is on the same IP network as the Singlewire InformaCast® RGB
(Multi-Color) Strobe.
Note
You may also download CyberData’s VoIP Discovery Utility program which allows you to
easily find and configure the default web address of the CyberData VoIP products.
CyberData’s VoIP Discovery Utility program is available at the following website address:
https://www.cyberdata.net/pages/discovery
Note
The Intercom ships in DHCP mode. To get to the
Home
page, use the discovery utility to
scan for the device on the network and open your browser from there.
2. When prompted, use the following default
Web Access Username
and
Web Access
Password
to access the
Home Page
(
):
Web Access Username:
admin
Web Access Password:
admin