Installing the InformaCast Enabled Paging Adapter
Restore the Factory Default Settings
Operations Guide
931767B
CyberData Corporation
32
Note
You must click on the
Save
button for the changes to take effect.
Note
For specific server configurations, go to the following website address:
https://www.cyberdata.net/pages/connecting-to-ip-pbx-servers
1. Enter the IP address of the
SIP Server
.
2. Enter the port numbers used for SIP signaling:
a. Remote SIP Port
b. Local SIP Port
3. Enter the SIP registration parameters:
a. SIP User ID
b. Authenticate ID
c. Authenticate Password
4. For
SIP Registration
, designate whether you want the VoIP Paging Server to register with your
SIP server.
5. At
Unregister on Reboot
:
RTP Settings
RTP Port (even)
Specify the port number used for the RTP stream after establishing a SIP call. This
port number must be an even number and defaults to 10500. The supported range is
0-65536. Enter up to 5 digits.
Asymmetric RTP
Specify if the remote endpoint will send and receive RTP packets on different ports. If
set to false, the device will track the address/port that is sending RTP packets during
a SIP call. If the address/port changes mid-stream, the device will disregard the SDP
and send all further RTP packets to this new address.
If set to true, this device will ignore the sending address/port and send RTP as
specified in the SDP. Warning! Enabling asymmetric RTP can cause the RTP stream
to be lost.
Most installations should not enable asymmetric RTP.
Jitter Buffer
Specify the size of the jitter buffer (in milliseconds) used for SIP calls. Valid values
are 50-1000.
RTP Encryption (SRTP)
When enabled, a SIP call's audio streams are encrypted using SRTP.
Click the
Save
button to save your configuration settings.
Click on the
Reboot
button to reboot the system.
Click on the
Toggle Help
button to see a short description of some of the web page
items. First click on the
Toggle Help
button, and you will see a question mark (
)
appear next to some of the web page items. Move the mouse pointer to hover over a
question mark to see a short description of a specific web page item.
Table 2-8. SIP Configuration Parameters (continued)
Web Page Item
Description