CONGRATULATIONS ON YOUR PURCHASE
Thank you for selecting the CyberPower HT600WSU2A
Premium Surge Protector. This manual explains the
features and operation of the HT600WSU2A. Please take
a few moments to read this manual.
FEATURES
1. Power
Plug product into any standard, grounded AC outlet to
provide power to your surge protector outlets.
*Caution: Operating this surge protector from a
non-grounded outlet invalidates your “connected
equipment warranty” and puts your valuable
equipment at risk.
2. Firestop Design Advanced Metal-Oxide Varistor
(MOV) with Built-In Fuses
Encased component dissipates surge events and
potential flame, sparks, and heat.
3. Rotating Outlet Bar
The 90-degree rotating outlet bars allow for easier
connection of multiple electronic devices when the wall
tap is mounted in a hard to reach location.
4. Six Tamper-Resistant Outlets
4 standard and 2 transformer spaced outlets.
5. Advanced Protection - Surge Protected LED
Illuminated when protection is working properly.
6. Clean Power - Ground LED
Illuminated when properly grounded.
7. USB Charging Ports*
Connect and charge up to 2 USB devices using the
surge protected USB charging ports.
*USB outlets cannot be used as a USB hub. This device
does not transfer data.
SPECIFICATIONS
•
Model Number:
HT600WSU2A
•
Outlets:
4 standard and 2 transformer spaced outlets
• USB Charging Rating :
5 V/4.8 A total
• Surge Protection:
1,680 Joules
• Electrical Rating:
125 V/15 A/1875 W
• UL Clamping Voltage:
UL 1449 3rd/500 V (L-N, L-G, L-G)
• Maximum Peak Current:
60,000 A
• 3 AC Lines Protected:
H-N: 30,000 A, H-G: 15,000 A,
N-G: 15,000 A (The maximum surge possible on
household wiring is 6,000 volts)
• Response Time:
Less than 1 nanosecond
• Attenuation:
Up to 43 dB
• EMI/RFI Filtration:
150 kHz to 100 MHz
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK
- Use only
in dry locations and only indoors.
DO NOT
plug into
another relocatable power tap.
DO NOT
“daisy chain”
surge protectors.
DO NOT
use with any aquarium
equipment.
DO NOT
use if properly grounded outlets are
not available.
DO NOT
install this device if there is less
than 10 meters (30 feet) or more of wire between the
electrical outlet and electrical service panel.
DO NOT
use
with ground-fault circuit-interrupter receptacles or
receptacles with indicator lights or controls.
DO NOT
use
for medical or life support equipment. To reduce the risk
of fire or electric shock, do not use this device with a
receptacle in which the slot openings do not align with
the blades. This device features an internal protection
that will disconnect the surge protective component at
the end of its useful life, but it will maintain unprotected
power to the load.
TROUBLESHOOTING
▪
If the grounded indicator does not light when you plug
in the surge protector, move the surge protector to a
different grounded three-prong AC outlet. If it still does
not light, return the product to the retailer for
assistance. If the surge protector appears to be working
properly, your outlets may not be a properly grounded
and need to be repaired by a professional electrician. If
the grounded indicator turns off after a period of use,
the surge protection has been depleted. Replace your
surge protector.
▪
If the protected indicator does not light, the surge
protector’s AC lines are no longer protected from surge.
The surge protector may have received a power surge
or spike beyond its specified limits that overloaded the
protection circuitry and rendered it inactive. The surge
protector has protected your connected equipment as
designed, but it will not protect against future surges,
and spikes. It should be replaced.
TECHNICAL SUPPORT
Please contact our Tech Support Department with
installation, troubleshooting, or general product questions.
• Phone: 1-877-297-6937
• Email: [email protected]
• Hours of Operation:
Monday – Friday 7:00am – 6:00pm CST
USER MANUAL
6-Outlet Surge Protector
HT600WSU2A
6-Outlet Surge Protector
HT600WSU2A
1
2
Copyright © 2018 Cyber Power Systems (USA), Inc. All rights reserved.
1
TOP
7
2
3
4
5
6
3
ADVANCED
PROTECTION
CLEAN
POWER
