P/N IM-C35KD Rev. C
2014 Commercial Wireless Systems International, LLC.
7
Section 1 - Description and Features
1.1 Product Description and Wireless System Overview
The CWSI CP-3500D is an intelligent addressable wireless fire alarm control panel. The CP-3500D
system provides for annunciation of up to 1024 individual addressable initiating devices including
smoke detectors, fire transmitters and repeaters. It has two on board transceivers that allows all
communications with devices to be done via radio frequency (RF) however only
the antenna “A”
transceiver is used in the CP-3500D. Since the communications are bi-directional the control panel
can send out control commands to perform functions including turning on or off repeater NAC circuits
and tandem smoke detector sounder activation. The advanced RF protocol and speed of the CP-
3500D allows a trouble with any one of up to 1024 initiating devices to be reported within 200
seconds. The CP-3500D is field programmable making the addition of devices both easy and cost
effective. An internal piezo sounder provides distinct tones for alarm, supervisory and trouble signals.
The system contains a clock and non-volatile memory that will record and store events by time and
date of occurrence. The CP-3500D is capable of storing 4000 events for later viewing as outlined in
the event log section of this manual.
The unit is also compatible with UL Listed Communicators making the CWSI CP-3500D a complete
installation solution. The system is designed with monitoring and emergency personnel in mind. The
LCD display provides easily identifiable pinpoint information displaying the specific initiating device(s)
in alarm, trouble or supervisory condition. A 21 button membrane switch panel is used for system
control and programming. The CP-3500D notification appliance circuits are 24 volts and field
selectable for Class A or B operation.
The CWSI initiating devices contain microprocessor based transceivers and are battery powered. Bi-
directional repeaters are used to create a cellular network type signaling path to and from the CP-
3500D control panel. Initiating devices transmit both status and alarm information. Repeaters process
the data and retransmit the data through the repeater network to and from devices and the CP-3500D
control panel. All transmitted signals are verified for data integrity, signal quality and reception
confirmation. The CP-3500D is responsible for reading all incoming transmission data displaying
information, sending commands back to repeaters to activate Notification appliance circuits, HVAC
shutdown, Elevator Recall, Tandem smoke detectors and many other control functions depending on
the particular application. Alarm, Supervisory and Trouble signals can be viewed at up to 8 remote
locations with the compatible WRA-3 remote annunciator.
The CP-3500D control panel has many new and enhanced features unavailable in previous wireless
systems due to recent technological advances. These features and industry advancements are what
make CWSI the unsurpassed leader in the wireless fire alarm industry.
Содержание CP-3500D
Страница 12: ...P N IM C35KD Rev C 2014 Commercial Wireless Systems International LLC 12 Figure 1...
Страница 21: ...P N IM C35KD Rev C 2014 Commercial Wireless Systems International LLC 21 Figure 2...
Страница 47: ...P N IM C35KD Rev C 2014 Commercial Wireless Systems International LLC 47 Figure 4...
