CWSI CP-3500D, Руководство по эксплуатации и установке

Страница: 25 / 79

P/N IM-C35KD Rev. C

2014 Commercial Wireless Systems International, LLC.
25
4.2.3 Menu Access, Navigation, Data Entry and Field Editing
When any of the soft key buttons are pressed to gain menu access you will be prompted to enter a
password. The password entry screen is shown below.
Password Entry
The cursor will be blinking in the password entry field under the first character to be entered. Use the
UP/DOWN keys to select the first number in the code. There are ten choices 0-9.
The default
password is 3000 so the first character is 3. After the number 3 is showing in the first digit, press the
RIGHT key to move the cursor to the next position then UP/DOWN to select the second character
and so on until all four numbers are showing. Press the ENTER key when the correct password is
showing and you will have access to the menus. If ENTER is pressed with any of the wrong
characters showing or 4 numbers are not entered, the field will clear and the entire password will
have to be entered again. When a correct password is entered a ten minute timer will start allowing
menu access without reentering the password. You will only have to enter the password again if ten
minutes elapses without any programming menu activity.
Once the correct password is entered the menu choices are displayed. Use the UP/DOWN keys to
move the highlighted box. When the desired menu is highlighted press the ENTER key and that menu
choice will be selected. Pressing the BACK key will take you one menu level back.
When you have accessed a programming screen that has data fields which can be edited, a blinking
cursor will be present under the first field. Press the ENTER key to edit the field or use the UP/DOWN
keys to move the cursor so it is under the field you want to edit then press the ENTER key. The field
being edited will be highlighted.
0 6 : 2 7 P M 1 1 / 2 2 / 2 0 0 7
C o n f i g P r o g r a m L o g s I n f o
E n t e r P a s s wo r d :