Mounting instructions VacuStar W900 / W1300 / W1600
Installation and assembly
35
6.12 Drive
CAUTION!
Drive and coupling of a system that is used for
conveying explosive material must comply with the
Directive 2014/34/EC (ATEX) with respect to
equipment category, temperature class and
explosion group.
ATTENTION!
–
Selection and design are within the
responsibility of the system builder.
–
Do not route axial forces into the VacuStar W
shaft when installing drive components.
–
Do not tap couplings or other connection
components onto the shaft, but slide them on.
–
Always slide additional components such as V
belt pulleys as far onto the shaft of the
VacuStar W as possible.
–
Check the torque and the sense of rotation.
The VacuStar W is driven via:
V-belt
Articulated shaft
Flexible coupling
where drives such as lorry P.T.O, electric motors, hydraulic motors
or diesel engine are possible.