CVS BP3MW1-4BCVS, Руководство пользователя

Страница: 16 / 37

14
c) When the device has detected your pulse, the heart
symbol in the display begins to blink.
d) When the measurement has been concluded, the air will
automatically release from the cuff. The measured systolic
and diastolic blood pressure values, as well as the pulse,
are now displayed.
e) The measurement results are displayed until you switch
the device off. If no button is pressed for 1 minute, the
device switches off automatically.
f) When the unit is set to the MAM (Measurement Averaging
Mode) setting, 3 separate measurements will take place in
succession, after which your result is calculated and
displayed as a single, averaged measurement. There is a 15
second resting time between each measurement. A count-
down indicates the remaining time and a beep will sound
for 5 seconds before the 2nd and 3rd readings begin.
If one of the measurements causes an error message, it will
be repeated one more time. If any additional error occurs, the
measurement will be discontinued and error code displayed.
Expanding the averaged measurement to see the three
individual readings:
This function allows you to view the three individual
measurements used to calculate the Measurement
Averaging Mode (MAM) reading.
a) After taking an averaging mode measurement, hold the memory button for 3 seconds
until you hear a short beep. (Do not hold the button longer than 7 seconds or you
will delete all the readings in the memory.)
b) Release the button and watch the screen. It will automatically scroll through the 3
measurements used in the reading.
Measurement
Complete
Systolic
Diastolic
Pulse
Measuring