Custom Dynamics® Dynamic LED Fork Reflectors
Installation Instructions
Questions? Call us at: 1 (800) 382
-
1388 M
-
TH 8:30AM
-
5:30PM / FR 9:30AM
-
5:30PM EST
04
-
2020
We thank you for purchasing the Custom Dynamics® Dynamic LED
Fork Reflectors. Our products utilize the latest technology and high
quality components to ensure you the most reliable service. We offer
one of the best warranty programs in the industry and we back our
products with excellent customer support, if you have questions be-
fore or during installation of this product please call Custom Dynam-
ics® at 1(800) 382
-
1388.
Package Contents:
-
LED Fork Reflector (pair)
-
BCM Adapter Harness (2)
-
Wire Tie Wrap (10)
-
Isopropyl Alcohol Wipe (1)
Part Numbers:
CD
-
FORK
-
BCM
-
AB CD
-
FORK
-
BCM
-
AC
CD
-
FORK
-
BCM
-
SB CD
-
FORK
-
BCM
-
SC
Warning:
Disconnect negative battery cable from battery; refer to owner
’
s
manual. Failure to do so may result in electrical shock, injury, or fire. Secure
negative battery cable away from positive side of battery and all other posi-
tive voltage sources on vehicle.
Safety First:
Always wear appropriate safety gear including safety glasses
when performing any electrical work. It is highly recommended that safety
glasses be worn throughout this installation process. Be sure vehicle is on
level surface, secure and cool.
Important:
This product is designed and intended for use as auxiliary light-
ing only. It is NOT intended to replace any original equipment lighting in-
stalled on the vehicle and should not be used for that purpose. This product
must be wired so that it does not interfere with any original equipment light-
ing.
ATTENTION
Please read all Information below before Installation
Batwing Fitment:
2014
-
2020 Harley
-
Davidson® Electra
Glide Ultra Classic (FLHTCU), Electra Glide Ultra Classic
Low (FLHTCUL), Ultra Limited (FLHTK), Ultra Limited Low
(FLHTKL), Limited CVO
™
(FLHTKSE), Street Glide (FLHX),
Street Glide Special (FLHXS), Street Glide CVO
™
(FLHXSE), and 2019
-
2020 Electra Glide Standard (FLHT).
2014
-
2020 Harley
-
Davidson® TriGlide® Models.
Instructions Page 1
Road Glide Fitment:
2015
-
2020 Road Glide (FLTRX),
Road Glide Special (FLTRXS), Road Glide Limited (FLTRK),
Road Glide Ultra (FLTRU), Road Glide CVO (FLTRXSE),
Road Glide Ultra CVO (FLTRUSE)
Instructions Page 4
Batwing Installation:
1.
Remove the
1/2”
nuts that secure the turn signal as-
sembly to the fork shown in
Picture 1
. Pull assembly
away from the fork to reveal the black wiring connect-
or as shown in
Picture 2.
2.
Unplug the connector by pushing in on the tab located
on the male side of the connection as shown in
Pic-
ture 3.
Push the tab and pull apart both sides at the
same time. Remove the turn signal assembly from the
bike completely.
1
