Custom Audio Electronics TK306, Руководство пользователя

Страница: 136 / 216

9.13
Cutting every speciied
number of pages
You can cut the paper every speciied number of pages
when “Gap” is selected in “Cut type”.
Specify the position to cut the paper when using continu-
ous paper.
When “Hole” is selected in “Cut type”, “Cut by page” is
always set to 1 and the device always cut the each page.
You cannot specify a number of pages that exceeds a total
of 551 mm in paper length.
Proceed as follows:
•
Open the ile to print.
• Select “Print” from the “File” menu.
• Click PREFERENCES.
• Enter the number of pages to cut the paper at in “Page(s)
per cut” in “Cut mode” on the “Setup” tab.
• Click OK.
• Click PRINT.
9.14 Changing the print quality
To change the print quality, proceed as follows:
•
Open the ile to print.
• Select “Print” from the “File” menu.
• Click PREFERENCES.
• Select a value of your choice in “Quality” on the “Setup”
tab.
• Click OK.
• Click PRINT.
136