Custom Audio Electronics KPM202, Руководство пользователя, Страница: 104 / 116

11.3 Alignment parameters
The “alignment point” is deined as the position inside the ticket to use for the notch alignment.
The distance between the notch edge and the alignment point is deined as “Notch Distance”.
The value of “Notch Distance” varies from a minimum value of -5 mm to a maximum value of 66 mm.
If the “Notch Distance” value is set to 0, the alignment point is set at the beginning of the notch:
0
-
PRINTING DIRECTION
+
Alignment
point:
notch front
Alignment
point
negative values
of “Notch Distance” positive values
of “Notch Distance”
Alignment
point
The following igure shows an example of paper with alignment point set by a positive value of “Notch Distance” (“Notch
Distance” = + A):
0
PRINTING DIRECTION
A+
Notch front Alignment point
104