Curtiss-Wright SSR/CHS/001/B, Руководство пользователя, Страница: 14 / 34

10 Multi-role Recorders User Guide (HW/BK/0034 | 12 Oct. 2021)
2
3. Flip the battery holder on its side to remove the battery.
4. Insert the new battery and then close the battery latch.
5. Apply nut-locking solution to the screw and tighten to torque 0.4 Nm.
6. Insert the battery holder into the multi-role recorder.
7. Apply nut-locking solution to the four screws and tighten to torque 0.6 Nm.
Installing a multi-role recorder in an aircraft
When installing a multi-role recorder in an aircraft or other location, ensure there is room to connect and disconnect
cables and also to insert and remove recording media.
As shown in the following figure, the multi-role recorder can be secured to a surface using mounting brackets or
mounted in a Dzus rail with the front Dzus screws.
Figure 4: Installing an SSR/CHS/001/B
N
OTE
: For the bend radius measurement of NET/CON/00X cables, see the
Network cables
data sheet.
For the bend radius measurement of cables connecting to any installed modules, see the
Cables
data
sheet.
Mounting brackets
Mounting screws
for Dzus rail
127
31.7
50.8
50
29.7
143
Include cable bend
radius and door-opening
radius in calculations for
space required