Curtiss-Wright R-NET, Техническое руководство

Страница: 183 / 206

SK77981-14
183 | R-net Technical Manual | Chapter 10 – Diagnostics
Curtiss-Wright | PG Drives Technology
3 DIAGNOSTIC TEXT DEFINITIONS
Once a trip text and module have been established use the following definitions to ascertain the possible cause and required
corrective procedure.
Trip Text Referral Point
Center Joystick Refer to section 3.1
Joystick Error Refer to section 3.1
Low Battery Refer to section 3.2
High Battery Refer to section 3.3
M1 Brake Error Refer to section 3.4
M2 Brake Error Refer to section 3.4
M1 Motor Error Refer to section 3.5
M2 Motor Error Refer to section 3.5
Inhibit Active Refer to section 3.6
Jstick Cal Error Refer to section 3.7
Brake Lamp Short Refer to section 3.8
Left Lamp Short Refer to section 3.9
Right Lamp Short Refer to section 3.9
L Ind Lamp Short Refer to section 3.10
R Ind Lamp Short Refer to section 3.10
L Ind Lamp Failed Refer to section 3.11
R Ind Lamp Failed Refer to section 3.11
Over-current Refer to section 3.12
Overtemp. (Acts) Refer to section 3.13
Overtemp. (Lamps) Refer to section 3.14
DIME Error Refer to section 3.15
Memory Error Refer to section 3.16
PM Memory Error Refer to section 3.17
Bad Cable Refer to section 3.18
Bad Settings Refer to section 3.19
Module Error Refer to section 3.20
System Error Refer to section 3.21
SID Detached Refer to section 3.22
Switch Detached Refer to section 3.23
Gone to Sleep Refer to section 3.24
Charging Refer to section 3.25
M1 Sensor Error Refer to section 3.26
M2 Sensor Error Refer to section 3.26
EM disconnected Refer to section 3.26
JS Static Timeout Refer to section 3.27
Orientation Error Refer to section 3.28
ASM Disconnected Refer to section 3.29
Gyro Disconnected Refer to section 3.30
Gyro Prf Active Refer to section 3.31
Switch Short Refer to section 3.33