Curtiss-Wright R-NET OMNI2, Техническое руководство, Страница: 130 / 164

Curtiss-Wright | PG Drives Technology
SK81935-01 130 | R-net Omni2 Technical Manual | Chapter 8 – Diagnostics
3 DIAGNOSTIC TEXT DEFINITIONS
Once the Omni2 trip text has been established, use the following definitions to ascertain the possible cause and required
corrective procedure. If the trip text does not appear in the following table, refer to the R-net Technical Manual SK77981 for
further details.
Trip Text Referral Point
Center Joystick Refer to section 3.1
Jstick Cal Error Refer to section 3.2
Latched Timeout Refer to section 3.3
DIME Error Refer to section 3.4
Memory Error Refer to section 3.5
Bad Cable Refer to section 3.6
Bad Settings Refer to section 3.7
Module Error Refer to section 3.8
System Error Refer to section 3.9
SID Detached Refer to section 3.10
Switch Detached Refer to section 3.11
Over Pressure Refer to section 3.12
Gone to Sleep Refer to section 3.13
Charging Refer to section 3.14
JS Static Timeout Refer to section 3.15
User Switch 1 Open Circuit Refer to section 3.16
User Switch 1 Short Circuit Refer to section 3.17
User Switch 2 Open Circuit Refer to section 3.18
User Switch 2 Short Circuit Refer to section 3.19
Right Signal 1 Open Circuit Refer to section 3.20
Left Signal 1 Open Circuit Refer to section 3.21
Forward Signal 1 Open Circuit Refer to section 3.22
Reverse Signal 1 Open Circuit Refer to section 3.23
Fifth Switch 1 Open Circuit Refer to section 3.24
Right Signal 1 Short Circuit Refer to section 3.25
Left Signal 1 Short Circuit Refer to section 3.26
Forward Signal 1 Short Circuit Refer to section 3.27
Reverse Signal 1 Short Circuit Refer to section 3.28
Fifth Switch 1 Short Circuit Refer to section 3.29
Right Signal 2 Open Circuit Refer to section 3.30
Left Signal 2 Open Circuit Refer to section 3.31
Forward Signal 2 Open Circuit Refer to section 3.32
Reverse Signal 2 Open Circuit Refer to section 3.33
Fifth Switch 2 Open Circuit Refer to section 3.34
Right Signal 2 Short Circuit Refer to section 3.35
Left Signal 2 Short Circuit Refer to section 3.36
Forward Signal 2 Short Circuit Refer to section 3.37
Reverse Signal 2 Short Circuit Refer to section 3.38
Fifth Switch 2 Short Circuit Refer to section 3.39