PROGRAMMING GUIDE
PG16
8$130(3"..*/((6*%&ø
/$
Programming Options
Temperature (default is 204°F/96°C)
Press the
TEMP
button for one second to check the control panel water temperature setting. To change
the temperature setting, press the
TEMP
button for three seconds, then release, to enter temperature
QSPHSBNNJOHNPEF5IFUFNQFSBUVSFTFUUJOHSBOHFJT'UP'1SFTTUIFMFGUCVUUPO
Ż
) or the right
CVUUPO
Ź
) to lower or raise the temperature. Press
ON/OFF
) to save and exit.
HOT - Changing the display to read HOT, instead of the current temperature
Press and hold the
TEMP
CVUUPOGPSmWFTFDPOET5IFi'wXJMMTUBSUnBTIJOH$POUJOVFIPMEJOHEPXOUIF
TEMP
button, at the same time, press and hold the
ON/OFF
CVUUPOGPSmWFTFDPOET3FMFBTFCPUICVUUPOT
5IFQSPHSBNJTOPXDIBOHFEBOEUIF-&%TDSFFOXJMMEJTQMBZi)05w8IFOi)05wJTEJTQMBZFEQSFTTJOHUIF
TEMP
button for one second will display the current water temperature.
°F/°C - Changing the display to Celsius (or changing back to Fahrenheit)
Press and hold down the
TEMP
CVUUPOGPSTFDPOET5IFUFNQFSBUVSFSFBEJOHXJMMDIBOHFUP$FMTJVT PS
'BISFOIFJU3FMFBTFUIF
TEMP
button.
Energy Saver (default is OFF)
•
8IFOFOFSHZTBWFSJTTFUUPi0''wUIFVOJUDPOUJOVPVTMZNBJOUBJOTUIFUFNQFSBUVSFTFUUJOHQSPHSBNNFE
into the control panel.
•
8IFOFOFSHZTBWFSJTTFUUPi0/wUIFIFBUJOHFMFNFOUTTIVUPGGGPVSIPVSTBGUFSUIFMBTUEJTQFOTF
•
8IFOFOFSHZTBWFSJTTFUUPi¡'wUIFVOJUXJMMCFHJOUPNBJOUBJOUIFXBUFSUFNQFSBUVSFBU¡'GPVS
hours after the last dispense.
•
5PSFUVSOUIFVOJUUPOPSNBMPQFSBUJPOBGUFSUIFVOJUIBTHPOFJOUPFOFSHZTBWFSNPEF 0/PS¡'QSFTT
one of the control panel buttons or dispense some water.
To change the energy saver setting
Press and hold both the
ON/OFF
) and
TEMP
CVUUPOBUUIFTBNFUJNFGPSTFDPOET6TFUIFTDSPMM
buttons,
Ż
and
Ź
CVUUPOTUPTFMFDUi0''wi0/wPSi¡'w1SFTT
ON/OFF
) to save and exit.
READY
ON/OFF
TEMP
AERATION
READY
Control Panel - WB5GT Series
Control Panel - WB5N Series
IMPORTANT:
The Fahrenheit/Celsius setting cannot be changed while the unit is set to display “HOT”. Set
WKHXQLWWRGLVSOD\WKHWHPSHUDWXUHÀUVWEHIRUHFKDQJLQJWKHWHPSHUDWXUHVFDOH
