background image

CURTMFG.COM

  

  

NEED ASSISTANCE?

  

  

877.287.8634

  

  

70108-INS-RC

  

  

PAGE 1

INSTALLATION MANUAL

70108

 WARNING

Never exceed the vehicle manufacturer's recommended gross vehicle weight rating (GVWR).

Parts List

Item Qty Description

1

1

Tow bar base plate

2

2

Tow bar mounting tab

3

2

Safety cable, 3,500 lbs.

4

10

Hex head cap screw, 

3/8"-16 x 1-1/4", grade 8

5

10

Nylock nut, 3/8"-16, grade 8

6

1

Flat washer, M6

7

1

Hex head cap screw, 

M6-1 x 30mm, CL8.8

8

2

Quick link, 1/4"

9

2

Socket plug

Tools Required

Torque wrench

Drill

Socket, 9/16"

Drill bit, 3/8"

Socket, 7/16"

T15 Torx bit

Socket, 7mm

Utility knife

Socket, 10mm

Large vise grip

Wrench, 7/16"

Nut driver, 5/16"

Wrench, 9/16"

--

Level of Difficulty

Moderate

 CAUTION

Take care when cutting any plastic or metal as injury may occur if done improperly.

Installed Attachment Tabs

Height

16"

Width

23"

Torque Specifications

M

et

ric

Bolt Size

CL8.8

CL10.9

SA

E

Bolt Size

Grade 5

Grade 8

M6 bolt

6.6 ft-lbs.

9.4 ft-lbs.

1/4" bolt

86 in-lbs.

122 in-lbs.

M8 bolt

16.0 ft-lbs.

22.9 ft-lbs.

5/16" bolt

178 in-lbs.

251 in-lbs.

M10 bolt

31.6 ft-lbs.

45.2 ft-lbs.

3/8" bolt

26 ft-lbs.

37 ft-lbs.

M12 bolt

55.1 ft-lbs.

78.9 ft-lbs.

7/16" bolt

42 ft-lbs.

59 ft-lbs.

M14 bolt

88.1 ft-lbs.

126.1 ft-lbs.

1/2" bolt

75 ft-lbs.

110 ft-lbs.

M16 bolt

136.7 ft-lbs.

195.6 ft-lbs.

5/8" bolt

128 ft-lbs.

180 ft-lbs.

M18 bolt

195.4 ft-lbs.

270.3 ft-lbs.

3/4" bolt

227 ft-lbs.

320 ft-lbs.

Use above torque setting unless otherwise noted

NOTICE

Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
This installation requires front fascia panels, headlight and windshield washer components 

to be temporarily removed and reinstalled. Some drilling and trimming are required.
To help prevent damage to the product or vehicle, refer to the specified 

torque specifications when securing hardware during the installation process.
If equipped, we recommend removing the base plate attachment tabs when not in use.

Product Photo

Not pictured: Safety cables, quick links and socket plugs

Содержание 70108










Отзывы: