background image

58957-INS-RA

  

  

05/29/2020

  

  

PAGE 1

INSTALLATION MANUAL

Product Photo

 WARNING

Do not exceed product rating or tow vehicle lamp load rating, whichever is lower.

Maintenance

Periodic inspection of all wires and connections should be performed 

to ensure there is no visible damage or loose connections.

NOTICE

Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
All steps must be followed to ensure the product will function properly. Once installed, 

test for proper function by using a test light or connecting a properly wired trailer.

Included Parts

Level of Difficulty

Moderate

Installation difficulty levels are based on time 
and effort involved and may vary depending on 
the installer level of expertise, condition of the 
vehicle and proper tools and equipment.

Wiring Location Guide* 

for SUVs and Vans (S)

S1

Behind driver side taillight housing

S2

Behind passenger side taillight housing

S3

Behind driver side rear access panel

S4

Behind passenger side rear access panel

S5

Behind driver side rear bumper

S6

Behind center of rear bumper

S7

Behind passenger side rear bumper

S8

Under rear floor panel

S9

Behind driver side rear access panel

S10 Behind passenger side rear access panel

S9

S10

S5

S6

S7

S1

S3

S8

S4

S2

* Representative vehicle shown

Tools Required

Ratchet

Drill

Socket, 12mm

Drill bit, 3/32"

Socket, 15mm

Fishwire

Flathead screwdriver Socket extension
Utility knife

Electrical tape

Panel trim 

removal tool

--

Wiring Location(s)

S1 and S2

Отзывы: