IMPORTANT: Please refer to additional safety warnings on last page.
- Keep out of reach children. Do not allow children to play with pump, pump Manifold or power supply.
- Never run flow pump dry or out of water, do NOT run dry.
- Do not submerse more than 1.5M/4 ft. of water depth.
- Always unplug with dry hands for any maintenance or service.
- eFlux flow pumps are 24VDC. Ensure one 24VDC UL® transformer is used per wave pump.
- Ensure 24VDC UL® transformer is plugged into a GFCI approved outlet with a drip loop.
- Turn controller OFF and disconnect pump from power before performing any service.
- Ensure eFlux flow pumps and any accessories all have a drip loop installed before plugging into
the flow pump manifold HUB as shown below.
- Only use in freshwater or saltwater applications, do not use pumps in other liquids.
SAVE THESE INSTRUCTIONS
AC Power
GFCI Outlet
24VDC
Power Supply
DC Flow Pump
Manifold HUB
eFlux DC
Flow Pump
Ensure use of drip
loop for all cables
Use only with GFCI
Protected AC Outlet
Ensure correct voltage power
supply for each component
om
Safety Instructions & Warnings 1
What’s Included & Installation
2
eFlux DC Flow Pump Installation
3
Warranty & Safety Warnings
5
Thank You!
For purchasing our eFlux Flow pump.
Please read all instructions before
getting in the LOOP!
eFlux DC Flow Pump
Safety Instructions & Warnings
Table of Contents
Page 1
- Do not exceed maximum head pressure or height specification.
- ALWAYS follow sump and tank/overflow manufacturer instructions regarding check valves
