Name | model
Curly’s Ag –
Agricultural Innovations | www.curlysag.com | [email protected]
Ellia 3000Hand-E | MODEL V2021
P a g e |
8
Assembly Instructions
You will need some tools
–
A Cordless Drill to use with the machine,
13mm (1/2”)
and 17mm (11/16”) Spanner or Socket, Phillips head screwdriver, and Allen keys
(a small rubber tipped hammer may also be need).
Handle Assembly
The handle comes in 3 Pieces - 1. Handrail, 2. Upper arm, 3. Lower arm.
(See figure a)
Figure a
Step 1.
Take the Handrail
(1)
and slide it through the Upper arm
(2)
(you might need to
undo the knob) Tighten the knob once you are happy with where the Handrail is
sitting. (This needs to be pretty tight to avoid movement while operating the Ellia
3000)
1
3
2
2
1
knob
