Page 1
4G Module Setup Instructions
This device has been preconfigured to operate with a Telstra SIM card.
The device can be supplied with or without a SIM, depending on the options selected at purchase. If you are
providing your own SIM, the “300 MB IoT” Telstra plan is recommended.
You can browse compatible data SIM plans here:
https://www.telstra.com.au/small-business/internet-of-things/data-sim-plans#shared
1
Insert SIM Card
Please ensure there is a SIM card inserted in the SIM
slot of the 4G Module.
If you have opted to supply your own SIM, please
insert is as shown.
ESD-006
Insert the supplied USB Cable into the “DATA”
socket of the 4G Module and the other end into
the USB slot on the Electronics Module of the BSP.
Note that under your 4G
Module, the correct orientation
of the SIM is printed.
2
Connect 4G Module to Bed Sensor Pad (BSP)