CUMMINS ALLISON Universal JetScan Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 26

CUMMINS ALLISON Universal JetScan Скачать руководство пользователя страница 18

17

Stopping Conditions and Recovery Steps

Universal JetScan will stop for a variety of reasons, all of which require action by the user.

Condition

Action

Universal JetScan may have

processed two or more notes as

one.

Remove all notes from the pocket indicated on the screen and place them

on the hopper. Press CONT.
If the alarm repeatedly occurs, adjust the gray thickness adjustment dial

located on top of the machine behind the hopper extension. Rotate in the

negative ( - ) direction as indicated by numbers on front of the dial.

Condition

Action

The machine is operating in the

sort

mode and has detected a

new denomination value.

Remove all notes from the pocket indicated on the screen and place them

with other processed notes. Universal JetScan automatically will restart

and resume processing.

Condition

Action

The machine has diverted notes

to the wrong pocket.

Remove all notes from the pocket indicated on the screen and place them

in the hopper; press CONT. Universal JetScan will revert to the previous

note count before the error occurred with no impact on batch (strap), sub-

batch, batch and day totals.

© 2014 Cummins-Allison Corp.

«
...
16
17
18
19
20
...
»

Содержание Universal JetScan



























Отзывы:

Нет отзывов