CUMMINS ALLISON JetSort LX Скачать руководство пользователя страница 35

Страница: 35 / 38

Daily cleaning procedures |

JetSort

Attended coin sorter | 35

Daily cleaning procedures

Daily cleaning of JetSort LX machines is recommended to ensure maximum productivity

and reliability.

Recommended cleaning materials

Simple Green, the recommended cleaning agent, can be an eye

irritant. Avoid eye contact. If eye contact occurs, flush eye(s) with

cool water for 5 minutes – remove contact lenses if present –

continue flushing eye (s) with cool water for 15 more minutes. If

irritation persists, consult physician.
Individuals with sensitive skin should rinse hands after using.

• Simple Green Safety Towels. (Part number: 022-2118-00.) A pre-moistened microfiber

towel also may be used. If using Simple Green concentrate, dilute to: 30 ml of Simple

Green per 240 ml of water. For material-safety-data sheets, see simplegreen.com.

• Microfiber towels. (Part number: 022-2223-00.)
•

Vacuum cleaner. (In the United States: order standard vacuum part number

022-1959-00 or heavy-duty vacuum part number 022-1308-00. outside of the

United States: Buy vacuum locally.)

Daily Cleaning

High-voltage levels may be present. Risk of electric shock.
Turn power Off and unplug power cord from machine before

cleaning.

To avoid machine/component damage and potential voiding of

existing warranty, follow these procedures:

Only use the specified tools for cleaning machine. Never use

metal tools.
If using Simple Green concentrate, dilute to: 30 ml of Simple

Green per 240 ml of water.
never use cleaners containing ammonia. Ammonia may remove

labels from machine.
never spray cleaners directly on machine components.

never wipe sort disk or pad, except as instructed on page 36.

Содержание JetSort LX







































Результаты поиска

Содержание JetSort LX

Отзывы:

Похожие инструкции для JetSort LX

Бренды по названию

Популярные бренды

CUMMINS ALLISON JetSort LX, Руководство пользователя

Результаты поиска

Содержание JetSort LX

Отзывы:

Похожие инструкции для JetSort LX

Бренды по названию

Популярные бренды