© 2012 Cummins-Allison Corp.
25
Strap
Density
Denomination
3) DEFAULT: press KEY 3
next selection: press KEY 5
Count
Speed
Diagnostic Setup contains special setup options used by trained Cummins Allison service technicians.
Press
KEY 5
to return to Special Mode option 1) USER SET UP. To exit the
Special Mode Menu
and
return to normal operation, press
KEY 7
.
Setup Fields
JetCount has Setup Fields that control a number of operating conditions. The fields are:
DEFAULT TYPE
PORT 2 STATUS
FUNCTION KEY SETTING
AUDIO ALARM STATUS
KEY LOCKOUT
PRINTER TYPE
SPEED SETUP
COMM REPORT
SETUP REPORT
PORT 1 STATUS
OPTIONS
REMOTE DISPLAY COUNT
SD FUNCTION CONTROL
To set up the various fields, hold down
KEY 15
for 3-5 seconds. Enter USER SET UP by
pressing
KEY 3
. You may then scroll forward through the fields with
KEY 5
or scroll back with
KEY 4
. To change a field’s settings, press
KEY 3
for an arrow prompt. Then press
KEY 13
(to
scroll back) or
KEY 14
(to scroll forward) to select among the options.
To make a sub-selection within a field, press
KEY 5
or
KEY 4
to move the setting arrow. Then
press
KEY
13
or
KEY 14
to make the sub-selection.
For example, to install and set
Denomination Value keys
, enter Setup and scroll to Setup
Field 10:
Strap
Density
Denomination
10) FUNCT KEY SETTIN
STRAP KEY 7 5
Count
Speed
To save settings (or changes to settings), you must return the arrow to its initial
start position, and then press KEY 6 to exit the setup option (the arrow should not
appear on the display screen). You may continue setup selection by pressing
KEY 4 or KEY 5
.
To exit setup and begin operation, press KEY 7.
