Date: 08-07-19 V1.0
PNEG-2276
Instructions
1004 East Illinois Street • Assumption, IL 62510 • 1-217-226-4421
PNEG-2276
Page 1 of 3
Printed in the U.S.A.
Copyright © 2019 by The GSI Group, LLC
www.gsiag.com
CN-345091
Hopper Switch Extension
Bracket Installation
Installing the Hopper Switch Extension Bracket
1. Measure down from the top center of the hopper panel (4) and make a mark.
Measure down:
a. 6" for a #300 hopper panel (1)
b. 12" for a #400 hopper panel (1)
Figure 1 Hopper Panel Extension Layout
2. Align the holes in the hopper extension bracket (2) on the mark and center the bracket horizontally
on the panel.
NOTE
:
The bracket (2) must face toward the bottom of the hopper (1).
3. Mark the hole locations and drill two 5/16" holes (3).
Ref #
Description
1
#300 Hopper (6")
#400 Hopper (12")
2
Hopper Extension Bracket (C2000810)
3
Drill 5/16" Holes
4
Hopper Panel