Motor and Belt Installation
1. Install the motor mounting bracket (A) between the vertical braces (B) with the bolts (C) and nuts
(D).
NOTE:
Make sure the motor mount bracket (A) is installed above the bearing bracket. Also make
sure that the rectangular slot in the motor mount bracket is in line with the pulley.
2. Install the motor (E) on the motor mounting bracket (A) with the bolts (C) and nuts (D).
3. Install the tensioner bracket (H) to the left side vertical brace (B) with the bolts (F) and nuts (G).
4. Align the keyway and insert the pulley (I) on the motor shaft.
5. Make sure the motor pulley (I), tensioner (J) and driven pulley are in a straight line. Secure the
motor pulley to the shaft using the set screw.
Figure 3-6
Motor installation
A
Motor mounting bracket (12–0213–HH)
F
Bolts (S-6606)
B
Vertical braces (12–0210–HH)
G
Nuts (S-10268)
C
Bolts (S-7485)
H
Tensioner bracket (12–0211–HH)
D
Nuts (S-968)
I
Motor pulley (High Flow Model —
1011–2638, High Efficiency Model —
16–0016 and Ultra Efficiency Model
— 16–0016)
E
Motor (3017-3101)
J
Belt tensioner (1011-9003)
22
PNEG-2054
54" Galvanized Butterfly Panel Fan
