Part No. 4801-5120 Rev. 1-2020
Mega-Cool System
Page 15 of 48
Install Removable End Cap
1. Removable end cap should be installed on end opposite the pump side of the reservoir unless a Center-Mount System is
installed. Removable End-Caps should be installed on both ends if a Center-Mount system is used.
DO NOT GLUE ON
REMOVABLE END-CAPS
. Tighten worm gear clamp provided with Removable End-caps to pipe.
Removable End
Cap w/Clamp
(Do Not Glue)
Float Valve Tank
Assembly
2 ½ ft (76.2 cm)
beyond end post.
Pipe extended 6
(15.2 cm)
beyond end post of system.
