Cumberland EDGE 891-00516, Схема подключения

Страница: 24 / 63

Chapter 1: Introduction
Table 1-2 Modules for 3-Slot Expansion Box and 6-Slot Expansion Box (cont'd.)
EDGE 2 VARIABLE OUTPUT KIT One kit to control two variables
EDGE 1 VARIABLE OUTPUT KIT one kit to control one variable
Damage inspection
Your system and its components were carefully inspected both electrically and mechanically before ship-
ment. After unpacking all items, check for any obvious signs of physical damage that may have occurred
during transit. Report any damage to the shipping agent immediately. Save the original box for possible
future shipment.
Returning the unit for repair
If you must return the system for repair, carefully package the system in its original box or an equivalent,
and follow these instructions:
1. Call the customer service department to get a Return Material Authorization (RMA) number. Have
on hand the system’s serial number and date code found on the system’s main board.
2. Indicate clearly that the box is to be given to the repair department and attach a copy of the RMA
number on the shipping label.
Contact information
If you experience trouble with your system, or to get repair or warranty information, please contact one of
the following :
GSI Electronics Inc.
Phone: 1-877-926-2777
Fax:1-866-880-2777
E-mail: mtl_techsupport@gsiag.com.
Or
Automated Production Systems (AP/Cumberland)
Technical Support: 712-239-1011
Phone: 217-226-4449
Fax: 217-226-3540
International Phone: 217-226-4401
International Fax: 217-226-4420
E-mail : apsales@automatedproduction.com