Cumberland EDGE 890-00601, Инструкция по установке и эксплуатации

Страница: 51 / 258

Chapter 5: Initial configuration
The tiles for all the modules that are detected are displayed in the upper right hand pane. The color
of the tile represents its state:
Green — Configuration is complete for this enclosure; all serial/type match for all modules. No
plug-in module is missing, and there is no trouble on any module within this Expansion Box.
Grey — Configuration is not completed (serial number match not completed)
NOTE: In offline configuration enclosure tiles are always grey.
Orange — At least one module, sub module or the enclosure itself is experiencing a trouble
condition.
2. Press on the icon to force the discovery of modules that have not been detected on the EDGE
network. This function can be used after having fixed a problem that had made modules invisible to
the controller on one of the two EDGE networks.
3. Press on the icon to add an Expansion Box. This function is used for offline configuration or to
indicate that an existing Expansion Box has not been discovered on the network by the system.
4. Press on the icon to duplicate the Expansion Box information. This icon is used for offline con-
figuration to duplicate an enclosure and its set of modules.
5. Press on the icon to delete an Expansion Box.
Deleting an Expansion Box has the following effect:
• All associated plug-in modules are deleted
• All associated equipment lose their input/output assignation - their corresponding tile in the
equipment configuration page becomes grey
NOTE: If there is equipment associated with any module within the Expansion Box, the delete oper-
ation is not allowed and you are prompted to unassign the inputs and outputs of the equip-
ment prior to attempting a deletion.
Viewing module statistics
Once all the modules have been detected by the EDGE, the information statistics about the module can
be seen in the Module detection page in system configuration .
The following statistics are displayed in the à Module detection page:
• Module ID
• Module address
• Automation
• Aut. Err. total
• Temperaure
You can also clear the statistics or delete the module on this page by clicking on the buttons marked as
such.
895-00693 EDGE 51