PNEG-2348
IR Hopper Sensor Installation
9
2. Installation
Attaching the IR Sensor to the Hopper
1. Align the IR upper bracket (5) to the two holes in the center strap (20) of the hopper and install using
1/4" x 3/4" HHCS bolts (21) and 1/4" wing nuts (7).
NOTE:
Install the HHCS bolt (21) with bolt head under the strap (20).
Figure 2A
Attaching the IR Sensor to the Hopper
Ref #
Part #
Description
Ref #
Description
5
C2000818
IR Upper Bracket
20
Hopper Strap
7
S-7002
1/4"-20 Wing Nut
21
1/4"-20 x 3/4" HHCS Bolt (S-6798)
Use only a qualified electrician to perform electrical connections. Follow all
local and national electrical codes.
Disconnect the quick connects before pivoting the hoppers or moving the drop
tubes for cleaning.
