5
7. Press the ON/OFF switch to the ON
position. The power indicator will then be
illuminated.
8. Water temperature will continue to rise
until boiling occurs. The switch will then
automatically go into the OFF position.
9. When the water cools, if you need boiling
water again, simply switch the kettle on.
HELPFUL HINTS
• Always use fresh water in the kettle.
• If the kettle is accidentally switched on
without a sufficient amount of water, a
boil-dry safety mechanism will
automatically switch the kettle off.
• The lid should always be securely in place
while heating water.
CLEANING AND
MAINTENANCE
• The kettle should always be emptied
before cleaning and storage.
• It is extremely important to remember
that cleaning of the kettle can only be
performed when the plug has been
removed from the power supply.
• Cleaning should be performed only when
the kettle has cooled down.
• Always ensure the electrical connections
of the kettle remain absolutely dry.
• Ensure the outside and the electrical
connections of the kettle are completely
dry before using.
• Wipe the kettle and base with a soft,
damp cloth. Do not use cleaning
products that can cause health hazard or
discoloration of the kettle.
• Do not use abrasive cleansers or scouring
agents of any kind on the interior or
exterior of the kettle.
•
Never immerse any part of the kettle,
especially the cable and base plate,
into water.
For cleaning the filter, please refer to the
below illustrations for assembling and
disassembling:
Filter Assemble Sequence:
Filter Disassemble Sequence
Maintenance:
Any other servicing should
be performed by an authorized service
representative.
Remove filter,
as shown in number 3.
Lift up the filter
until sound
Hang filter
While filter is hanging,
lift filter up.
Pull filter out slightly, as
shown in number 1, then
turn filter downward, as
shown in number 2.
Turn continuously
1
2
3