IMPORTANT
SAFEGUARDS
When using electrical appliances, basic safety
precautions should always be followed including the
following:
1. READ ALL INSTRUCTIONS.
2.
To protect against risk of electrical shock, do not
immerse cord, plug or can opener in water or other
liquid.
3.
Close supervision is necessary when any
appliance is used by or near children.
4.
Unplug from outlet when not in use, before putting
on or taking off parts, and before cleaning.
5. Avoid contacting moving parts.
6.
Do not operate any appliance with a damaged
cord or plug, or after the appliance malfunctions,
or is dropped or damaged in any manner.
7.
The use of attachments not recommended or sold
by Cuisinart may cause fire, electrical shock, or
risk of injury.
8. Do not use outdoors.
9.
Do not let cord hang over edge of table or counter,
or touch hot surfaces.
10. Do not open pressured (aerosol type) cans.
11. Do not open cans of flammable liquids such as
lighter fluid.
12. Do not use can opener for other than intended
use.
13. Do not leave unattended while in use.
14. This appliance is intended for household use only
and not for commercial or industrial use.
15.
Caution:
Do not immerse in water.
FOR HOUSEHOLD
USE ONLY
SAVE THESE
INSTRUCTIONS
NOTICE
This appliance has a polarized plug (one blade is wider
than the other). As a safety feature, this plug will fit in
a polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not attempt to
defeat this safety feature.
INTRODUCTION
Congratulations! You now have a can opener you’ll
be proud to display on your kitchen counter. This very
contemporary Cuisinart
®
Can Opener is constructed
of sturdy stainless steel, with smooth lines and an
extra-wide base. Good looking, and almost impos-
sible to tip, it requires only a quick press of the lever to
operate. Opening cans has never been easier.
OPERATING INSTRUCTIONS
1. Plug cord into outlet.
2. Raise can opener lever.
3. Position the can under the guiding
posts and lower the lever, making
sure the Power Cut
™
blade is
positioned inside the rim of the can.
Note: Be sure the lever is inserted all
the way.
4. Once the Power Cut
™
blade pierces
the can, cutting begins. There is
no need to hold the lever down
during cutting.
5. Cutting action will automatically stop,
once can is completely open.
6. Can will remain in position until lever
is lifted.
7. To remove can, hold can firmly
with one hand while lifting lever
with the other.
8. Carefully remove lid from magnet.
1
2
3
4
1. Power Cut
™
Blade Assembly
2. Can Opener Lever
3. Guiding Posts
4. Can Stop
5. Base
6. Cord Storage (not shown)
7. BPA-Free (not shown):
All parts that come in
contact with food are BPA-Free
1
2
3
4
5
3
10ce113921_sco60_ib.indd 1-3
8/12/10 11:32:57 AM
