background image

4

USE AND CARE

Unwind the power cord. Check that the crumb tray is in place and 

that there is nothing in the toaster slot. Plug power cord into the 

wall outlet.

1.  Insert Slice(s) of Bread

 

Be sure that multiple slices do not overlap and that the carriage  

 is in the up position.

2.  Set the Browning Control

 

Turn rotary dial to the desired position:

   

 

       

Dial

 

Setting  

Color

 

 

 

 

 1-2 

 light 

 

 

 

 3-4 

 medium 

 

 

 

 5-6 

 dark

Some notes on browning

Toasting is a combination of cooking and drying of the bread. 

Therefore, differences in moisture level from one bread to another 

can result in varying toasting times.

•  For slightly dry bread, use a lower setting than you normally 

would.

•  For very fresh bread or whole wheat bread, use a higher setting 

than normal.

•  Breads with very uneven surfaces (such as English muffins) will 

require a higher toast setting.

•  Thickly cut pieces of bread (including bagels) will take longer to 

toast, sometimes significantly longer, since more moisture must 

be evaporated from the bread before toasting can occur. Very 

thick pieces may require two cycles.

•  When toasting raisin or other fruit breads, remove any loose rai-

sins, etc. from the surface of the bread before placing into the 

toaster. This will help prevent fruit pieces from falling into the 

toaster or sticking on the guide wires in the slot.

•  Before toasting bagels, slice each bagel into two equal halves.

Single Slice Toasting 

If you are toasting a single slice of bread, set the heat selector to 

a lighter setting than you normally would. The toaster is designed 

to heat the whole toasting chamber for two slices. By lowering the 

heat for a single slice, you won’t overtoast.

These breads and pastries should be warmed using the  

Defrost button

Frozen Waffles, Pancakes, French Toast and Frozen Bagels

Toaster pastries

Exercise caution with toaster pastries; the filling can become quite 

hot, long before the surface of the pastry becomes browned. Never 

leave toaster pastries unattended while toasting or warming.

3.  To Begin Toasting

    Press the carriage lever until it locks into the down position.

4.  To Stop Toasting

    When the toasting cycle is finished, the toast will be raised. If  

    you wish to stop the cycle before it is finished, simply press the  

    Cancel button.

Tips

•  Never force foods into the toasting slot. Foods should fit freely 

between the guide wires.

•  Do not place buttered breads or pastries with fillings or frostings 

in the toaster, as this could create a fire hazard.

•  Uneven toasting is usually due to bread slices of uneven  

thickness.

•  After use, unplug your toaster from the electrical outlet.

Содержание CPT-340









Отзывы: