Cuisinart CPK17U, Руководство пользователя

Страница: 10 / 16

10
B Setting the Temperature
Achieving the correct water brewing temperature is essential for optimum flavour
extraction of tea and coffee. The quick reference guide below shows the ideal brewing
temperatures for different types of teas and coffees. Brewing temperature for green tea
and black tea vary considerably; as green tea won’t maintain its flavour or therapeutic
properties if the water is too hot and black tea will never reach its peak if the water is
not hot enough.
Water temperature Drinks
85ºC White teas e.g. White Peach, Ginger and Lemon, Green
teas e.g Sencha, Gunpowder and Jasmine and black
instant coffee
90ºC Oolong
95ºC French press/cafetiere coffee
100ºC Black teas e.g. Earl Grey, Ceylon and Darjeeling and
herbal teas e.g. Chamomile, Peppermint and Dandelion
If drinks require a lower temperature than the above, the kettle should be supervised
and switched off once it reaches the correct temperature. The LCD reads out in 5 degree
increments.
C Operation
n
Open the lid by pressing the lid release button located on the top of the handle.
n
Fill the kettle with the required amount of cold water. The water gauge is at the rear of
the kettle and is marked with min (0.5L) and max (1.7L) and 2 cup and 4 cup markers.
N.B. Take care not to exceed the max mark as this may cause spitting or leaking from
the spout when boiling.
n
Push the lid closed; you will feel and hear a slight click.
n
Align the kettle over the powerbase and gently lower it into position, sitting firmly on
the base.
n
Plug the kettle into the mains; the LCD and water indicator window on the back of
the kettle will illuminate and the LCD will show the ambient temperature (the water
temperature will be displayed to the nearest 5 degrees, e.g. 20ºC).
N.B. On initial use the LCD window will show the ambient water temperature.
n
Press the 85ºC button for coffee or green and white tea or the 100ºC button for black
or herbal teas (the selected temperature button will illuminate and the temperature
selected will be shown in the LCD window, flashing continuously until kettle is started).
Press the On/Off switch to start boiling; a beep will sound for 1 second to indicate that
heating has started.