Cuisinart CCJ200E, Инструкция по эксплуатации

Страница: 6 / 16

6
1. INTRODUCTION
You have just purchased a Cuisinart® juicer.
. PRODUCT FEATURES
1. Lid
. Juicing cone
3. Sieve
4. Container
5. Spout with anti-drip system
6. Release mechanism
7. Motor base
8. Cord winder (not shown)
3. USE
A. ASSEMBLING THE JUICER
• Rinse the lid, the juicing cone, the sieve and the container in
warm water. Do not rinse the motor base in water but simply
wipe it using a damp cloth.
• Fit the container onto the motor base. The three plastic notches
located on the bottom of the container are inserted into the
three holes located on top of the motor base.
• Position the juicing cone on the top of the release mechanism.
• Place the lid on the container.
• Plug the unit in. The juicer is ready to be used.
B. USING THE JUICER
• Place the unit on a horizontal, level surface.
• Remove the lid.
• Place a glass or other container under the spout.
• Set the spout to the open position.
• Cut the fruit horizontally.
• Place the centre of the fruit on the centre of the juicer. Place
your palm on the fruit.
• Press the fruit down firmly enough to activate the release
mechanism.
• When you feel the juicing cone through the skin of the fruit,
remove the fruit.
• Take another piece of fruit and repeat.
• After juicing approximately 00 gr of fruit (the equivalent of 3
oranges), the sieve will appear to be full.
• Remove the fruit from the juicing cone and place the lid on the
juicer. Press down on the cover to activate the ‘fast spin’. This
will release any juice remaining in the sieve.
• Once the juice stops flowing, release the lid. The ‘fast spin’ func-
tion will stop.
• Turn the drip spout to the closed position and remove the glass
or container from under the spout.
• Remove the lid and the juicing cone and empty the pulp from
the sieve.
• Rinse the juicing cone and repeat the above steps as often as
required until you have the desired amount of juice.
1
3
4
5
6
7
8