Cuckoo CBT-I1030RW, Руководство пользователя, Страница: 27 / 64

27
HOW TO USE
www.cukooamerica.com
Basic method of use
SIMPLE CONTROL PANEL ON THE MAIN FRAME
Sit on the seat.
Press the button.
Press the STOP
button.
Sit in the center of the toilet
seat to activate the sensor.
Press the DRYER button to
begin drying.
Sit on the seat.
Sit on the center of the
toilet seat.
Press the CLEAN button. Press the STOP button.
CLEAN function can be used. CLEAN or DRYER operation stops.
After cleaning, the bidet
will automatically begin the DRYER
function for 3 minutes then shut off.
If the button that was pressed
during CLEAN is pressed one
more time, MOVE CLEAN can
be used.
• The simple control panel can activate basic functions (CLEAN/STOP) in the
case that the remote control is lost, broken, or the batteries have been
depleted.
• Due to its limited functions, the temperature control and water pressure
cannot be adjusted using the simple control panel.
Simple
Control Panel
The seating sensor of this product is installed inside the seat.
It activates as soon as your skin comes in contact with the seat at the location of the seating sensor. If a cover, etc. is
applied over the surface of the seat, the skin will not touch the seat, which may not activate the seating sensor.
The initiated function
will stop.
The bidet will carry out the function for 3 minutes
before automatically shutting off.
Press the button.
or
Press the desired button to
initiate the cleaning function.
If the button that was pressed during use is pressed
one more time, MOVE CLEAN can be used.