12
How to Detach or Attach the Pressure Packing
1
How to Detach the Pressure Packing
Grab the outer part or the outer part and the stainless steel part of the clean cover and
pull the packing gently to remove it. (Wash it with a neutral detergent and a sponge.)
2
How to Attach the Pressure Packing
Insert the packing into the grooves on the clean cover. As shown in the figure on the right, turn
the clean cover while pressing the inner and outer parts of the packing with both of your thumbs.
-
If the packing is attached loosely to the clean cover, steam may escape, and cooking and
warming may not be performed properly. (Before attaching the pressure packing, be sure
to align the bumps of the packing with those of the clean cover. Refer to page 11 .)
3
Checking the Pressure Packing Assembly Status
Lay the clean cover on a clean surface and push the inner and outer parts of the packing
with thumbs or index fingers while turning the packing.
(Make sure that the packing has a circular shape.)
Properly Assembled
Improperly Assembled
The packing maintains a circular shape.
If the packing has an elliptical shape, it is assembled
incorrectly. (It is easier to attach the packing right after
washing it.)
1
Hold the inner packing and pull the packing in
the direction of the arrow to detach and clean it.
2
Clean the inner packing with a neutral detergent and
a sponge, and remove moisture from it. As shown in
the figure below, insert the packing into the groove.
Then, press and turn the inner and outer parts of the
packing with index fingers.
Caution
•
Do not remove the inner packing unless it is absolutely necessary.
•
It is advisable to clean it with a clean dish towel without separating it.
How to Detach or Attach the Inner Packing
Caution: If the pressure packing is not
installed, steam leak may occur.
Caution: If the inner packing is not installed,
steam leak may occur.
Taking Care of the Product
PK10 SerCHS_ .indb 12
2020-04-13 2:13:01