5
.
generAl notes
1. — General Notes
Carbon frames and (full) carbon forks
are lightweight construction compo-
nents which are manufactured in several
production steps using modern manu-
facturing procedures. The light weight
is achieved mainly by using high-per-
formance fibre composite materials in
conjunction with an appropriate method
of fibre construction.
Component safety and rigidity, in addi-
tion to low mass were important criteria
in the design of the carbon frames and
forks. Unavoidable irregularities in the
fibre orientation arising during manual
procedures and small air inclusions in
the resin coating layer or surface une-
vennesses are purely visual in nature
and have no influence on the quality and
performance of the frame. Differences in
finish and “blemishes” do not constitute
grounds for complaint.
•
Our carbon frames and integral
(full) carbon forks are approved for
a maximum rider weight of 115 kg
system weight (rider + complete
bike + luggage). Loadings deviating
from the purpose of use intended
(e.g. jumps) may lead to damage
and constitute a risk to the user.
We accept no liability for damage
arising from improper use.
It is not permissible to fit additional
components to any frame or fork tubing
which is attached by means of clam-
ping to the tubing in question. Undefined
stresses in the circumferential direction
of the tubing considerable can occur in
this way which may cause damage and
which may drastically reduce the ser-
vice life, and may also lead to a risk to
the safety of the user.
Basically every frame including forks
must be given a thorough examination
at regular intervals in respect of dam-
age (e.g. cracks, visible delamination,
discolouration etc.). Shock and impact
stresses may cause damage not visible
externally such as delamination (sepa-
ration of fibres from the surrounding
plastic matrix) in the bottom laminate
layers causing a drastic reduction in
performance and consequently safety
as well. After any accident, crash or
other defined or uncontrolled mechani-
cal stresses the frame and forks must
not be ridden for reasons of safety and
should be sent to us for examination
(see also Guarantee).
With regard to accessories used the
instructions for use and user guide
provided by the manufacturer concerned
must be followed!
All manuals and user guides at all-guides.com
all-guides.com