CUAV LTE-LINK se, Руководство пользователя

Страница: 29 / 38

LTE-LINK SE user's Guide
25
5.7.4 TF memory card overflow handling

Before starting recording, check whether the remaining space in the current TF memory
card is less than 512MB. If it is less, delete the earliest file created in the TF card until
the remaining space in the TF memory card is greater than or equal to 2GB.

When recording a video, it will judge whether the size of the recorded video file is
larger than 2GB in real time,if the video file is going to be larger than 2GB, the current
video file will be saved first, Create a new video source file and save the following
video source data, until the recording stops or the remaining storage space in the TF
card is less than 100MB.
5.8 Taking photos
Before using the camera function of the LTE-LINK SE link device, the user needs to debug
the HDMI interface and TF memory card of the terminal link device according to chapter 4.2.3
and 4.2.4. Some descriptions of the camera function of the terminal link device are as follows:

The resolution of the photos taken is subject to the highest resolution supported by the
camera device, the highest is 1080P;

The saving path of photos is the photo folder in the root directory of the TF memory
card;

Before taking the photos, make sure that the remaining space of the TF memory card is
greater than 100MB , otherwise the photo will fail.
The status message of the screen interface when the photo is taken shown as Figure 5-18,
and the photo failed for unknown reasons shown as Figure 5-19. The photo failed because the
remaining space of the TF memory card is less than 100MB, screen shown as Figure 5-20.