CTP Systems CTPhone 1900, Руководство по применению

Страница: 76 / 132

4-2 DOC00101-01
CTPhone 1900 System Configuration
System Configuration
The CTPhone Manager is used to configure CTPhone extensions and
CTPhone handset features on the CTPhone Controller. CTPhone Man-
ager software also runs diagnostics, and reports alarms and traffic statis-
tics.
The CTPhone Manager software is so easy to use that instructions for
using it are included in on-line help. The purpose of this section is to pro-
vide you with an overview of system configuration and what information is
useful to have before working with CTPhone Manager.
Starting the CTPhone Manager (Normal Startup)
1 Make sure the PC is connected to a CTPhone Controller.
2 Turn on the PC and start Windows.
3 In the Wireless program group, double-click the Wireless Manager
icon.
4 Type a password in the dialog box, and press RETURN or click OK.
The Wireless Manager tool bar appears.
Note If you receive a warning message that says Wireless Manager can-
not open Port 1 or 2, communication port configuration does not match
hardware configuration. You can change the software configuration by fol-
lowing the instructions in Setting COM Ports on page 4-3.
The following sections tell you how to get started using the CTPhone Man-
ager.
Getting Help
To start the CTPhone Manager on-line help, click on the icon in the
CTPhone Manager tool bar (see Figure 3-14 on page 3-23).
To get context-sensitive help on a particular CTPhone Manager screen or
dialog box, press function key F1 on your keyboard.