CTP Systems CTPhone 1900, Руководство по применению

Страница: 105 / 132

DOC00101-01 5-17
Diagnostics and Troubleshooting
Handoff by Recall
After entering the password and seeing BULKER DU in the display:
1 Press until HAND OFF BY RCL appears in the display.
2 Press until the option you want, HAND OFF RCL ON or HAND
OFF RCL OFF, appears in the display.
3 Press to return to idle mode or press to go the next pass-
word protected function.
Reset to Factory Defaults
After entering the password and seeing BULKER DU in the display:
1 Press until RESET TO FACT DFLT appears in the display.
2 Press .
RESET DONE appears in the display.
CTPhone Handset Charger
Charging Batteries
The battery charger charges a handset with battery and a spare battery.
To charge a battery:
1 Insert handset with battery (power off) in the charger’s front pocket.
2 Insert spare battery in the charger’s rear pocket.
The front pocket LED changes to amber and then changes to red to
indicate that rapid charging is in progress.
If a spare battery is in the rear pocket, the rear pocket LED changes to
amber while waiting for the handset to finish charging or alternates
between green and amber to indicate discharge is in progress.
Only one battery is charged at a time. When the handset is fully
charged, the front pocket LED changes to green and the rear pocket
LED changes to red to indicate that charging is in progress.
3 When LEDs change to green, remove the handset or spare battery.
When charging of a handset or battery is complete, the charger
switches to trickle charge until you remove the handset or battery.
FCN
END
FCN