La
se
r S
ky | U
se
r M
an
ua
l 1
07
9V
18
09
12
The power to engage
1
2
3
4
5
6
7
8
9
CONNECTION PANEL
nr.
Description
1
USB
Connect USB devices to this port for the OPS or COS™.
Note:
use this USB-port for software updates.
2
HDMI1/2/3 IN
Connect an HDMI or DVI device to this HDMI port.
HDMI3(ARC): Connect an ARC-enabled home theater receiver to this HDMI port.
3
DP(DisplayPort)
IN
Connect a DP device to this DP port.
Note:
The current selected source is audible.
4
PC IN
Connect the video/audio of a computer to these ports.
5
RS-232C
For remote control, service and other uses.
6
Connect headphones to this jack. The current selected source is audible.
7
SPDIF digital
audio OUT
Connect a digital sound system to this SPDIF jack.
8
TOUCH OUT 1/2
Output for external devices connected to PCx, HDMIx or DP ports, which support touch
systems.
9
LAN
Connects the external network or router.
Note:
If the CTOUCH display is on the VGA source and does not get any signal, it will go into stand-by mode after
two minutes.
When the CTOUCH display is on others sources and does not get any signal, it will go into stand-by mode
after 10 minutes.
The terms HDMI and HDMI High-Definition Multimedia Interface and HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
