CTI Janus Programmable Automation Controller IOG
55
8.3.5
File Management
This page allows you to perform operations on the controller files. The following operations can be performed.
•
Copy to Front Panel SD Card:
Copies selected user file(s) from the internal SD card ‘/ctiplc’ folder
•
Copy from Front Panel SD Card:
Copies selected user file(s) or folder to the
internal SD card ‘/ctiplc/user’
or ‘/ctiplc/graphics’ folder
•
Replicate the System:
Copies files from internal SD card to front panel SD card necessary to replicate the
OS and application on another Janus controller
•
Download File to Computer:
Downloads a se
lected file from the internal SD card to the PC ‘Downloads’
folder
•
Upload File from Computer:
Uploads a single file from the PC to the
‘/ctiplc/user’
or ‘/ctiplc/graphics’
folder on the internal SD card
•
Delete User Area Files:
Deletes selected files from the
‘/ctiplc/user’
or ‘/ctiplc/graphics’
folder on the
internal SD card.
•
Copy Core Dump Files to Computer:
Creates a zip file of the selected Core Dump file and transfers it to
the computer.
•
Copy Core Dump Files to Front Panel SD Card:
Creates a zip file of the selected Core Dump file an
transfers it to the external SD card.
•
Delete Core Dump Files:
Deletes selected Core Dump files on the internal SD card.
NOTES:
•
An error message will be displayed if the all selected files cannot be copied.
•
The [R
EFRESH
] button can be used to check SD card status
•
The [C
OPY
] button initiates the selected file transfer. For operations that access the external SD card, it
must be inserted and detected by the system (via Status message) before SD card file transfer can start.
•
The
File Management
operation can be cancelled by the user at any time before the [C
OPY
] or [D
ELETE
]
pushbutton is pressed by selecting a different web page or closing the browser window. Once the button
is pressed, the file transfer will continue until successful completion or an error condition occurs.
